JVC GR-D21 User Manual

Page 26

Advertising
background image

EN

26

DUBBING

Connector
cover
*

*

When connecting the cables, open this cover.

** Connect when an S-Video cable is not used.
*** If your VCR has a SCART connector

To use this camcorder as a player

➝ use the provided

cable adapter.
To use this camcorder as a recorder (GR-D31 only)

use a commercially available output cable adapter.

VCR

TV

To AV

*

To
S-VIDEO

)

Audio/Video
cable
(provided)

S-Video cable
(optional)

Dubbing To Or From A VCR

To Use This Camcorder As A Player

1

Following the illustration, connect the camcorder

and the VCR. Also refer to pg. 15.

2

Set the camcorder’s Power Switch

y

to “PLAY”

while pressing down the Lock Button

t

located on the

switch, turn on the VCR’s power, and insert the
appropriate cassettes in the camcorder and the VCR.

3

Engage the VCR’s AUX and Record-Pause modes.

4

Engage the camcorder’s Play mode to find a spot

just before the edit-in point. Once it is reached, press
4

/6

6

on the camcorder.

5

Press 4/6

6

on the camcorder and engage the

VCR’s Record mode.

6

Engage the VCR’s Record-Pause mode and press

4

/6

6

on the camcorder.

7

Repeat steps 4 through 6 for additional editing, then

stop the VCR and camcorder when finished.

NOTES:

● As the camcorder starts to play your footage it will appear

on your TV. This will confirm the connections and the AUX
channel for dubbing purposes.

● Before you start dubbing, make sure that the indications

do not appear on the connected TV. If they do, they are
being recorded onto the new tape.

● Set the video out select switch of the cable adapter as

required:
Y/C

: When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video
cable.

To choose whether or not the following displays
appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (

pg. 23, 25).

Or, press DISPLAY

k

on the remote control to

turn on/off the date indication.

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (

pg. 24, 25).

• Indications other than date/time and time code

..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in

the Menu Screen (

pg. 23, 25).

To AUDIO, VIDEO**
and S-Video
connectors

Cable
Adapter***

To Use This Camcorder As A Recorder
(GR-D31 only)

1. Set the camcorder’s Power Switch

y

to “PLAY”

while pressing down the Lock Button

t

located on

the switch.

2. Set “S/AV INPUT” to “ON” and set “REC MODE” to

“SP” or “LP” (

pg. 24).

3. Connect the cables as shown in the illustration and

load a cassette to record on.

4. Press the Recording Start/Stop button

w

to

engage the Record-Pause mode. “

A/V IN

appears on the screen.

5. Press the Recording Start/Stop button

w

to start

recording.

%

rotates.

6. Press the Recording Start/Stop button

w

again to

engage the Record-Pause mode.

%

stops

rotating.

NOTES:

● To use an output cable adapter (commercially available),

refer to its instructions.

● After dubbing, set “S/AV INPUT” back to “OFF”.

● Analogue signals can be converted to digital signals with

this procedure.

● It is also possible to dub from another camcorder.

GR-D31/21EK 16-27

02.12.19, 9:15 PM

26

Advertising