JVC GR-D21 User Manual

Page 23

Advertising
background image

EN

23

USING MENUS FOR DETAILED ADJUSTMENT

SYSTEM

SYSTEM” functions which are set when the Power

Switch

y

is set to “

” are also applied when the

Power Switch

y

is set to “PLAY” (

pg. 24).

BEEP

OFF: Even though not heard while shooting, shutter
sound is recorded on the tape.

BEEP: The beep sounds when the power is turned on
or off, and at the beginning and end of recording. Also
to activate the shutter sound effect (

pg. 18).

[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also activates the
shutter sound effect (

pg. 18).

TALLY

OFF: The tally lamp remains off at all times.

[ON]: The tally lamp comes on to signal the start of
recording.

REMOTE

OFF: Disables the camcorder from receiving the
remote control's beam signals. The camcorder cannot
be operated by the remote control.

[ON]: Enables the camcorder to receive the remote
control’s beam signals.

DEMO MODE

OFF: Automatic demonstration will not take place.

[ON]: Demonstrates certain functions such as
Programme AE with special effects, etc., and can be
used to confirm how these functions operate.
Demonstration starts in the following cases:

• When the Menu Screen is closed after “DEMO

MODE” is turned “ON”.

• With “DEMO MODE” set to “ON”, if there is no

operation for about 3 minutes after the Power
Switch

y

is set to “

” or “

” .

Performing any operation during the demonstration
stops the demonstration temporarily. If no operation is
performed for more than 3 minutes after that, the
demonstration will resume.

NOTES:

● If a tape is in the camcorder, the demonstration cannot be

turned on.

● “DEMO MODE” remains “ON” even if the camcorder

power is turned off.

● If “DEMO MODE” remains “ON”, some functions will not

be available. After viewing demo, set to “OFF”.

PRIORITY

[LCD]: When the LCD monitor is fully open, even if
the viewfinder is pulled out, the image is displayed
only on the LCD monitor; it will not be displayed in the
viewfinder.

FINDER: When the viewfinder is pulled out, even if
the LCD monitor is fully open, the image is displayed
only in the viewfinder; it will not be displayed on the
LCD monitor.

CAM RESET

[CANCEL]: Does not reset all settings to the
factory-preset.

EXECUTE: Resets all settings to the factory-preset.

CAMERA DISPLAY

• Settings made in the “

CAMERA DISPLAY” Menu

are effective only for video shooting.

• Settings made in the “

CAMERA DISPLAY” Menu

remain effective even when the Power Switch

y

is set

to “

”. However, the menu settings can be changed

only when the Power Switch

y

is set to “

”.

BRIGHT

pg. 11, “To Adjust The Brightness Of The Display”

ON SCREEN

LCD: Keeps the camcorder’s display (except the date,
time and time code) from appearing on the connected
TV screen.

[LCD/TV]: Makes the camcorder’s display appear on
screen when the camcorder is connected to a TV.

DATE/TIME

OFF: The date/time does not appear.

[AUTO]: Displays the date/time for approx. 5
seconds in the following cases:

• When the Power Switch

y

is set from “OFF

(CHARGE)” to “

” or “

”.

• When tape playback starts. The camcorder displays

the date/time when scenes are recorded.

• When the date is changed during tape playback.

ON: The date/time is always displayed.

• The date indication can also be turned on/off by

pressing the DISPLAY Button

k

on the remote

control.

[ ] = Factory-preset

RETURN

A

R

E

M

A

C

D I SPLAY

RE N

E

ON SC

LCD / TV

U

A

O

T

I ME

T

DATE /

T I ME CODE

CLOCK

ADJ .

F F

O

12 . 03

.

5

2

30

:

17

BR I GHT

MELODY

EEP

B

RETURN

AM RESET

C

LCD

R I OR I TY

P

ON

EMO MODE

D

ON

EMOTE

R

ON

AL LY

T

S

Y

S

TEM

GR-D31/21EK 16-27

02.12.19, 9:15 PM

23

Advertising