Welch Allyn REF 29400 User Manual

Page 40

Advertising
background image

Welch Allyn OAE Hearing Screener Directions for Use 705353 Rev E

39

8. Exit the application when the WA OAE Firmware download is complete.

Note: If you need assistance installing the WA OAE Load software on your PC or
downloading WA OAE Firmware, please contact Welch Allyn Technical Support at 1-
800-535-6663.


The table below provides more details about the various buttons and options on the WA OAE
Load application screen.

Component

Description

Information area

This area of the Main Screen displays information about the WA OAE
Load program.

Start command
button

Select (click on) the Start command button to begin to download the
firmware. Note that the program requires 2-3 minutes to complete the
installation process. Make sure the time and date on your PC are
accurate.

From Disk command
button

Select (click on) this command button to launch an Open dialog box. This
dialog box lets you run the WA OAE Load installation program from
another disk.

Set Date command
button

Select (click on) this command button to update the time and date settings
in screener. The date and time will be taken from your PC.

Load Fonts

Select (click on) this command button to load the fonts for the Label
Printer. I will check to make sure this is still accurate.

Help command
button

This command button is inactive.

Exit command
button

Select (click on) the Exit command button to close the WA OAE Load
Main Screen.

Select Option radio
buttons

This area of the Main Screen contains a set of radio buttons next to a list
of the options that apply to the WA OAE Load process. In most cases,
select (click on) the radio button next to "Update internal software and
default protocol." Select (click on) the radio button next to "Update only
default protocol" only if you have received a new test protocol file and you
only want to update that part of the WA OAE Firmware.

Select ComPort field

The setting in this field is only relevant if you are using a serial cable for
communication between the PC and screener. In that case, select (click
on) the arrow to display a list of the Communication ports available. Click
on the communication port to which the screener is connected.

Status area

This area displays information about the progress of the WA OAE
Firmware download.

Advertising