Directorio Marcas UTStarcom IAN-02EX
English: +

Manual Gratis UTStarcom - IAN-02EX

background image

Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual

pag.1

UTStarcom iAN-02EX

TELEPHONE’S ANALOGUE ADAPTER

INSTALLATION GUIDE

Release V1.8.2.17a

Páginas:
Descargar Quejarse

Contenido del Manual

  • p. 1/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.1 UTStarcom iAN-02EX TELEPHONE’S ANALOGUE ADAPTER INSTALLATION GUIDE Release V1.8.2.17a
  • p. 2/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.2 SUMMARY SKYPHO VOIP SERVICE....................................................................................................3 iAN-02EX UTStarcom PACKAGE CONTENT .....................................................................3
  • p. 3/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.3 SKYPHO VOIP SERVICE The use of the SKYPHO’s voice service on IP (VoIP) is simple and quick. You need only an Internet access, a traditional telephone (analogue) and a
  • p. 4/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.4 EQUIPMENT PHYSICAL CONNECTION First of all, you have to make the physical connection of the equipment, following the simple instructions hereafter included: Internet
  • p. 5/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.5 ACCESS TO THE ADAPTER When you finished the connections, you can proceed with the iAN-02EX ATA configuration. Before proceeding with the ATA configuration it is necessary
  • p. 6/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.6 Access to ATA when the DHCP is not working 1. configure the static IP address on the LAN port of your PC. Click on “Start \ Settings\ Network connections“, double click
  • p. 7/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.7 ATA CONFIGURATION Before proceeding with the configuration of your iAN-02EX ATA via WEB Browser, it is important that you have at your disposal the Eutelia’s username
  • p. 8/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.8 LAN parameters Click on “ LAN configuration ” menu, then verify that the “Status” item of the DHCP Configuration is set on Disable. Note: If in your LAN are used static
  • p. 9/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.9 VoIP parameters 1. click on “ User ” menu, then select user0 and insert the values of your SIP account provided by Eutelia during registration: Username = Telephone Number
  • p. 10/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.10 2. click on “ SIP ” menu, then on “Send#” item choose the option Disable and click OK 3. click on “ STUN ” menu, then verify the values and click OK The “NAT Address”
  • p. 11/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.11 Save configuration 1. click on “ Save Configuration ” menu, then select “Configuration File” and click on “Save” 2. after few seconds, will appear the “ Reboot ” page:
  • p. 12/12
    Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.12 CONFIGURATION PARAMETERS OF UTStarcom IAN-02EX ATA EQUIPMENT Access parameters to the equipment: IP address: verify on ADSL modem User name: supervisor Password: Assigned