Exiting a menu mode, On-screen menus (continued), Sleep timer (select models only) – Technicolor - Thomson RCR311B User Manual

Page 12

Advertising
background image

TIP:

Any keypress other than the number keys is ignored.

If you don’t enter the sleep time within 10 seconds after
pressing the SLEEP key, you must start over at step 1.
The illuminated ON•OFF key blinks four times and then
turns off, indicating your attempt to program the Sleep Timer
has been unsuccessful.

On-screen Menus (continued)

12

1.

Press the component key whose
menu you want to access.

2.

Press the MENU key. The illuminated
ON•OFF

key blinks, indicating you

are in the Menu Mode.

3.

Use the VOL+/- and/or CH+/- keys
to navigate through the
on-screen menu system.

4.

To make a selection from
the on-screen menu, press
the MENU or OK key to
select the highlighted item.

TIP:

If the remote doesn’t respond,

check to see that the illuminated ON•OFF
key is still blinking. Remember: it times
out after 20 seconds. If this happens, just
press the MENU key again, and then
retry your selection.

MENU

VOL & CH

MENU

OK

ON•OFF

(BLINK)

SAT

CBL

VCR

DVD

TV

Exiting a Menu Mode

The remote automatically times out of Menu Mode after 20
seconds of inactivity (no keys being pressed). At that time,
the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the
corresponding component key on the remote (TV, VCR•DVD,
SAT•CBL

). The illuminated ON•OFF key turns off and the

remote is automatically set to control the component whose
key you just pressed to leave the Menu Mode. For example,
if the remote is in DVD Menu Mode, press the DVD key to exit
the Menu Mode. The remote is now out of Menu Mode and
is set to control the DVD. To control another component,
simply press the component key for the unit you wish to
control (TV, SAT, CBL).

Sleep Timer (Select Models Only)

This feature automatically turns off your TV at a duration you
choose from 1 to 99 minutes. The Sleep Timer only works if you
have found a code that controls your TV. The timing
mechanism for the Sleep Timer is built into your universal
remote control. To program the Sleep Timer, follow these steps.

PROGRAMMING THE SLEEP TIMER

1.

Press and release the TV key.

2.

Press and hold the SLEEP key for
three seconds. The illuminated
ON•OFF

key turns on.

3.

Release the SLEEP key.

4.

Using the number keys, enter the
desired time in minutes (from 1-99
minutes). To set the timer to a number
under 10 minutes, first press 0 and
then the desired number (e.g., 05 for
five minutes). The illuminated ON•OFF
key blinks with each keypress.

5.

Once the second number is entered,
the illuminated ON•OFF key turns off.

6.

The Sleep Timer is now set.

SLEEP

TV

ON•OFF

ON

OFF

ON•OFF

(BLINK)

Advertising