Directorio Marcas Oki C5150
English: +

Manual del usuario Oki - C5150, C5200

background image

© 2004 Oki Data Americas, Inc.

58368601

Install the Duplexer

1. Unpack the duplexer and remove

the shipping materials.

2. Turn off the printer.
3. Insert the duplexer through the

hinged door in the back of the
printer.

4. Turn on the printer.
5. Print out the Menu Map.

a. Press

+

one or more times until

INFORMATION MENU

appears

on the display.

b. Press

ENTER

twice.

The MenuMap prints.

6. Check to be sure that “DUPLEX

installed” shows in the information
at the top of the first page. If it
doesn’t, turn off the printer and
push firmly on the duplexer to be
sure it is firmly seated in the
printer, then turn on the printer and
print the MenuMap again.

7. If you will always be using duplex

printing, go into the printer menu
and change the default setting for
DUPLEX to ON:

a. Press

+

until you see

PRINT

MENU

on the display.

b. Press

ENTER

.

c. Press

+

until you see

DUPLEX

on the display.

d. Press

ENTER

.

e. Press

+

to change the setting

from

OFF

to

ON

.

f. Press

ENTER

to engage the

setting, then press

ON-LINE

to

save the setting and exit the
menu.

Activate the
Duplexer in the
Printer Driver

Windows

®

PCL Driver (C5400, C5400n)
Click

Start

Settings Printers

[

Printers and Faxes

for XP].

The Printers (Printers and Faxes)
dialog box opens.

8. Right click the PCL printer icon,

then click

Properties

9. Click the

Device Option(s)

tab.

10.Click

Duplex Option Unit

.

11.Click

OK

, then close the Printers

(Printers and Faxes) dialog box.

Postscript Emulation Driver
(C5400n)
1. Click

Start

Settings Printers

[

Printers and Faxes

for XP].

The Printers (Printers and Faxes)
dialog box opens.

2. Right click the Postscript

emulation printer icon, then click

Properties

.

3. Next:

Windows XP, 2000 and NT 4.0:

click the

Device Settings

tab.

Windows Me and 98: click the

Device Options

tab.

4. Under

Installable Options

, click

Duplex

and select

Installed

.

5. Click

OK

, then close the Printers

(Printers and Faxes) dialog box.

Hiper-C Driver (C5150, C5200)
1. Click

Start

Settings Printers

[

Printers and Faxes

for XP].

The Printers (Printers and Faxes)
dialog box opens.

2. Right click the printer icon, then

click

Properties

.

3. Next:

Windows XP, 2000 and NT 4.0:

click the

Device Option(s)

tab.

Windows Me and 98: click the

Printer Properties

tab, then click

the

Device Option

tab.

4. Select

Duplex Option Unit

.

5. Click

OK

, then close the Printers

(Printers and Faxes) dialog box.

Macintosh

®

OS 8.x and 9.x (C5400n)
1. Activate

Chooser

from the Apple

menu.

2. Select

LaserWriter 8

.

3. Click

Printer

Setup

.

4. Click

Configure

.

5. Change the

Duplex Unit

setting to

Installed

.

6. Click

OK

twice.

7. Close

Chooser

.

OS X to X.1 (C5400n)
No activation is required.

B

ACK

E

NTER

O L

N

INE

C

ANCEL

M

ENU

C5150/C5200/C5400/C5400n

Duplex Option

Oki 42158411 Duplex Unit

Installation Instructions

(continued on back)

Páginas:
Descargar Quejarse

Contenido del Manual

  • p. 1/2
    © 2004 Oki Data Americas, Inc. 58368601 Install the Duplexer 1. Unpack the duplexer and remove the shipping materials. 2. Turn off the printer.3. Insert the duplexer through the hinged door in the back of the printer. 4. Turn on the printer.5. Print out
  • p. 2/2
    OS X.2 (C5400n)1. Activate Print Center from Local Hard Drive → Applications → Utilities → Print Center . 2. Highlight the printer name and select from the menu Printers → Show Info . 3. Click the box next to Duplex . 4. Click Apply Changes and exit to the