Data boxes, Waypoint display - radar mode – Raymarine Radar equipment Raychart Chartplotter RC530 PLUS User Manual

Page 50

Advertising
background image

2-14

hsb

2

PLUS Series Color LCD Display

Cu
stom

iz

in

g t

he

Sc

reen

Prese

nta

ti

on

Opt
ions

Data Boxes

A group of up to six data boxes can be displayed, if the information is available
on your system. You select which data is displayed in the boxes during
system set up as described in Chapter 7:Setting Up the System Defaults
.

The default data box positions are along the bottom of the display. Each box
can be moved to the required position on the screen using the context-sensitive
cursor.

Note: If you select BDI, CDI or Nav Data for display in a half-screen window,
the data boxes are temporarily hidden.

At any time, you can switch the group of data boxes on or off using the SCREEN
soft key. When first installed, the boxes are all OFF. When the display unit is
switched off and on again, the data boxes return to their last-used states (ON or
OFF) and positions.

Note: The

SCREEN soft key does not control the sixteen data boxes that can be

displayed in the half-screen window.

➤ To switch the group of data boxes on or off:

1. Press the SCREEN default soft key.

2. Press the DATABOXES soft key to toggle the setting from ON to OFF or from

OFF to ON.

To return to the default soft key display, press ENTER.

If you turn the data boxes on and none are displayed, you need to select the
ones you require using the system set up menu, as described in Section 7.3,
System Set Up Parameters
.

➤ To move any data box:

1. Use the trackpad to position the cursor over the box until the letters BOX are

displayed.

2. Press ENTER to take control of the box, use the trackpad to move it to the

required position, and press ENTER again.

Waypoint Display - Radar mode

If you are currently going to a waypoint, you can display the active waypoint
on the radar picture. The waypoint may have been generated locally on the
chartplotter, or received via the SeaTalk or NMEA interface.

Note: If you use the

GOTO CURSOR function, the active cursor is displayed as a

lollipop symbol on the radar.

SCREEN

SCREEN

DATABOXES

OFF ON

Advertising