Selecting a half-screen window for display – Raymarine Radar equipment Raychart Chartplotter RC530 PLUS User Manual

Page 44

Advertising
background image

2-8

hsb

2

PLUS Series Color LCD Display

Se

le

cti

ng

th

e M

ode

o

f

Op
er

atio
n

➤ To change the mode, press the DISPLAY key to show the DISPLAY pop-up, then

press again to cycle through the modes available, shown in the Figure 2-5.

Figure 2-5:

Using the DISPLAY Key

The selected mode is shown by an icon with a red border and the mode is
displayed on the screen. The associated half-screen window soft keys are also
displayed.

When the required mode is shown, press ENTER or CLEAR. The default soft
keys are displayed. The selected mode is shown full-screen; in Radar and
Chart mode you can switch on half-screen windows for additional display, as
described in the following section.

If you press DISPLAY again, the pop-up and soft keys for the current mode are
shown.

Selecting a Half-Screen Window for Display

Note: Windows can only be used with Radar or Chart screens, they are not
available on the data log screen.

➤ To select a window for display:

1. From the full-screen Radar or Chart mode, press the DISPLAY key.

The following soft keys are displayed with an image of each available win-
dow:

DISPLAY

Advertising