3 the chartplotter display – Raymarine Radar equipment Raychart Chartplotter RC530 PLUS User Manual

Page 29

Advertising
background image

Chapter 1: Overview

1-13

Th

e Ch

artplo

tter

Di

sp

la

y

Th

e Ch

artplo

tter

Di

sp

la

y

1.3 The Chartplotter Display

The

hsb

2

(PLUS) series LCD Display can include a Chartplotter. The

chartplotter includes a small-scale world map and detailed navigation
information is displayed when a cartographic chart card is installed. The
details displayed depend on the chart zoom level selected. A plotter mode is
provided to enable route plotting and tracking at large scales even when a chart
card is not installed, or when the chart is zoomed beyond the available
cartographic detail. A typical chartplotter screen is shown in Figure 1-3.

The chartplotter uses position information from a GPS, DGPS, WAAS or
Loran-C instrument. Once the position fix has been established, your vessel’s
position, if on screen, is shown as a boat shape pointing in the direction of the
current heading (or COG if heading data is not available). If no heading or
COG data is available, the vessel is shown as a circle.

The chartplotter screen includes a status bar that displays chart scale, with
either cursor position, range and bearing or, when the cursor is homed to the
vessel (by pressing FIND SHIP), vessel position, Speed Over Ground (SOG),
Course Over Ground (COG) and fix type (VES POS, DIF FIX or SD FIX).
The status bar also indicates if radar/chart overlay is switched on.

Any waypoints you have placed are displayed (unless you turned them off in
Chart Set Up as described in Chapter 7) and the current route is shown.
Information can be viewed on-screen by positioning the cursor over a
waypoint, current route or chart object. The chartplotter screen can also show
additional information, depending on your currently selected options, set up
selections and data available from other equipment.

An example chart display, in its default configuration, with a chart card
installed, is shown in the following illustration.

Several functions are available to control the display as follows:

Zoom in/out and Pan the Display

Offset the Chart or Center the Chart around the Vessel

Overlay Radar Targets onto the Chart Display

Synchronize the Chart and Radar (if radar data is available)

Operation of these functions is described in Chapter 2.

Advertising