Raymarine Radar equipment Raychart Chartplotter RC530 PLUS - Manual (Page 144)

5-40 hsb 2 PLUS Series Color LCD Display
C
leari
ng
th
e Cu
rren
t
Tr
ac
k
Figure 5-9: Track Interval Setting Guide
You can change the setting at any time. The setting applies only to the current
track and is not saved as a stored track.
➤ To set up a track:
1. Press the MORE soft key to access the TRACK INTERVAL soft keys.
Press the appropriate soft key to set either a time interval or a distance inter-
val; press the UP arrow to increase the interval, the DOWN arrow to decrease
the interval.
Press ENTER to return to the track soft keys.
2. Press the TRACK OFF ON soft key to toggle tracks on.
Your vessels trail will be displayed on-screen, with a line joining the
points at the selected interval.
Clearing the Current Track
You can clear the current track from the screen. When you select CLEAR
TRACK, if the current track has not been saved, you have the option of saving it.
➤ To clear the current track:
1. Press the CLEAR TRACK soft key.
2. If the track has not been saved the SAVE TRACK soft keys are displayed.
To clear the track without saving it in the Track List, press NO.
To save the track in the list, press YES. The Name track soft keys are dis-
played and you should continue as described in the following section, Sav-
ing and Naming a Track.
2 hrs, 5 min
6 hrs, 15 min
12 hrs, 30 min
15 days, 15 hrs
375 nm
750 nm
75 nm
5 days, 5 hrs
2 days, 14 hrs, 30 min
1 day, 13 hrs, 30 min
12½ min
1 hr, 2½ min
TRACK TIME
TRACK DISTANCE
1 sec
5 sec
TRA
CK INTER
V
AL SETTING
D4948-2
10 sec
30 sec
1 min
3 min
5 min
10 min
30 min
0.1 nm
0.5 nm
1.0 nm
D5674-1
TRACK
LIST MORE¬
TRACK INTERVAL
0.1nm
TRACK
OFF ON
CLEAR
TRACK
SAVE
TRACK