Raymarine Radar equipment Raychart Chartplotter RC530 PLUS - Manual (Page 140)

5-36 hsb 2 PLUS Series Color LCD Display
Tra
nsf
erri
ng
W
aypoi
nt
s a
nd
Ro
ut
es
➤ To save waypoints to, or load waypoints from a user cartridge:
CAUTION:
Loading waypoints from a user cartridge overwrites any existing
waypoint and route lists.
1. Insert a C-MAP User Card into the lower of the two cartridge slots.
1. Press MARKS followed by the LOAD/SAVE USER CARD soft key.
2. The User Card Menu and associated soft keys are displayed.
3. Press the SAVE WPT/RTE DATA TO CARD or LOAD WPT/RTE DATA FROM
CARD soft key; an appropriate warning and Yes/No soft keys are displayed.
4. Press Yes to continue or No to abandon the operation and return to the pre-
vious screen.
5. If the operation is successful, confirmation of the number of Routes and
Waypoints saved/loaded is displayed.
If the operation fails, the Save Failed message is displayed.
MARKS
D5594-1
USER CARD PRESENT
WARNING
SAVING DATA TO THE USER
CARD WILL ERASE ALL EXISTING
WAYPOINT AND ROUTE DATA
ON THE CARD.
USER CARD MENU
ARE YOU SURE ?
YES NO
D5595-1
USER CARD PRESENT
SAVE COMPLETE
SAVED 2 ROUTE(S) AND
7 WAYPOINT(S)
USER CARD MENU
LOAD WPT/
RTE DATA
FROM CARD
SAVE WPT/
RTE DATA
TO CARD
CHECK
CARD IN
USER SLOT