Removing a chart card, Displaying the chart data – Raymarine Radar equipment Raychart Chartplotter RC530 PLUS User Manual

Page 107

Advertising
background image

Chapter 5: Standard Chart Operations

5-3

Re

m

ov

in

g a

Ch

art

Ca

rd

Figure 5-1:

Removing the Chart Card

Removing a Chart Card

We recommend that before you remove a chart cartridge, you ensure the chart
is not being used on any other display unit. Removing a chart cartridge whilst
a display unit is accessing the chart may cause an operational error.

➤ To remove a chart card:

1. Open the card cover, at the lower left of the display front panel.

2. Press on the card you wish to remove, and move the top of the card to the

left to clear the retaining pegs.
The card will spring half-way out, enabling you to grip the card and
remove it from the slot.

3. Remember to close the card cover so that it clicks shut, to prevent water

from entering the card reader assembly.

Displaying the Chart Data

The new chart information will be displayed when you move the cursor into an
area covered by the new chart or, if it is already in the area, change the range
scale.

If an

hsb

2

series repeater display is connected, the chart can also be accessed by

the repeater display. To see the chart you may need to zoom or pan, to redraw
the chart area to the screen.

D4158-1

Advertising