Radio Shack Univer 15-2138 - Manual (Page 37)

O
WNER
’
S
M
ANUAL
5. Using the number keys, enter 9 7 4. The The bottom IR segment will
flash twice and the Commercial Skip programming screen will appear:
6. Select a Commercial Skip mode by pressing CBL, SAT, VCR, or AUX once.
7. Press FFWD once and watch for the end of a commercial sequence that
typically may have four to six commercials and last 2 to 3 minutes in
real time.As it ends, press PLAY once.
NOTE : If the time between FFWD and PLAY key presses exceeds 30 seconds, the
program will ignore your action. The bottom IR segment will display a long
flash to denote the time limit has been exceeded and the screen will return to
the Program Keys menu. You will need to start again at step 4 and perform this
step within 30 seconds.
NOTE : Although FFWD and PLAY keys are used in programming this step,
other keys may be used depending on how they functioned on the original
remote control.
8. To save the settings, press and hold P until the bottom IR segment
flashes twice. The program keys will appear again.
9. Exit programming by pressing once. The display will return to the
last-selected device menu screen.
Using Commercial Skip 37
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 37