Radio Shack Univer 15-2138 - Manual (Page 31)

O
WNER
’
S
M
ANUAL
1. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
2. Select a Favorite Channel Mode by pressing CBL, SAT, TV, VCR, or AUX
once. The bottom IR segment flashes once as the selected device
key animates.
3. Press below OTHER once. The Other programming screen will appear:
4. Using the number keys, enter 9 9 6. The bottom IR segment will flash
twice and the Favorite Channel programming screen will appear.
NOTE : If the bottom IR segment displays one long flash, an error has occurred.
Try repeating this step.
5. Using the number keys, enter a favorite channel number (e.g., 0 1 2).
Then press P once.
NOTE : If the original remote control required pressing an Enter key to change the
channel, also press the ENTER key after the channel number (e.g., 0 1 2 ENTER).
6. If desired, repeat step 5 for each channel to be stored, up to a total of
10 channels.
NOTE : After storing 10 channels, the remote control will exit the Favorite
Channel programming screen and again display the program keys.
7. To exit programming with less than 10 favorite channels stored,
press and hold P until the bottom IR segment flashes twice.
The display will return to the last-selected device menu screen.
Programming Favorite Channel Scan 31
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 31