Using macros – Radio Shack Univer 15-2138 User Manual

Page 26

Advertising
background image

8-

IN

-O

NE

R

EMOTE

P

OWERED

B

Y

K

AMELEON

USING MACROS

P

ROGRAMMING

A F

AVORITE

C

HANNEL

M

ACRO

(

CONTINUED

)

NOTE

: If there are more than 15 key presses in the sequence, the bottom IR seg-

ment will display a long flash, denoting an error. The display will return to the
last-selected device menu screen. To program the macro, start again with step 3.

5. To save the macro, press and hold P until the bottom IR segment

flashes twice. The program keys will appear again.

6. Exit programming by pressing

once. The display will return to the

last-selected device menu screen.

7. Now, if you aim the remote at the devices selected in step 4 and press

the programmed macro key once, the TV will turn on and tune to
channel 3. Then, the Cable Box will turn on and tune to channel 071.

P

ROGRAMMING

A M

ASTER

P

OWER

M

ACRO

I

N

M

Y

S

YSTEM

M

ODE

A macro can be programmed onto the PWR key to turn on or off as
many as seven home theater devices.

NOTE

: This following example assumes the Home Theater system contains a

Satellite Receiver, a DVD Player, an Audio Receiver, and a TV.

1. Press and hold P until the bottom IR segment flashes twice.

The program keys will appear:

2. Press above MACRO once. The Macro programming screen will appear:

3. Press PWR once.The last-selected device menu screen, including

,

will be displayed.

4. Enter the macro sequence. For this example, press SAT once, followed

by PWR once. Next, press DVD once, followed by PWR once. Then press
AUD once, followed by PWR once. Finally, press TV once, followed by
PWR once, and then MY SYSTEM once.

5. To save the power macro, press and hold P until the bottom IR segment

flashes twice.The program keys will appear again.

26 Using Macros

RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 26

Advertising