Radio Shack Univer 15-2138 - Manual (Page 17)

O
WNER
’
S
M
ANUAL
a. Press VCR once.
b. Using the number keys, enter the four-digit VCR code for your
DVD Player/VCR Combo. If performed correctly, the bottom
IR segment will flash twice.
c. Press OK once. The bottom IR segment displays one long flash.
NOTE : If a VCR setup code is not listed, you can use the VCR key to program a
separate VCR or another device (see “Reassigning Device Keys” on page 35).
8. To exit programming, press twice. The display returns to the last-
selected device menu screen. For future reference, write the working
code in the below boxes:
DVD Player/VCR Code:
Brand Name:________________________________
VCR Code (if used):
Brand Name:________________________________
SEARCHING FOR YOUR CODE
If your device does not respond to the RadioShack 8-in-One Remote
after trying all codes listed for your brand, or if your brand is not listed
at all, try searching for your code.
NOTE : Before performing a code search for a CD or DVD player or a VCR, turn
on the device and insert the required media.
For example, to search for a code for your TV:
1. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
2. Press above SEARCH once.The Search Codes programming screen
will appear:
continued on next page...
Programming A DVD Player-VCR Combo/Searching For Your Code 17
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 17