Radio Shack Univer 15-2138 - Manual (Page 15)

O
WNER
’
S
M
ANUAL
4. Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD).
The selected device key will animate.
NOTE : Refer to the “Device Table” on page 12 when choosing a device key for
programming.
5. Use the Manufacturer’s Codes (starting on page 118) to locate the
type of device and brand name and then use the number keys to
enter the first four-digit code for your device. If performed correctly,
the bottom IR segment will flash twice.
NOTE : If the bottom IR segment displays one long flash instead, a mistake has
occurred. Try entering the same code again.
6. Aim the remote at the device and press PWR once. The device should
turn off. If it does not, repeat steps 5 and 6, trying each code for your
brand until you find one that works. If it still doesn’t work, try
Searching For Your Code on page 17.
7. If the code works, press OK once. The bottom IR segment flashes twice.
8. If desired, repeat steps 4 through 7 for each device you want to con-
trol.When finished, press twice to exit programming and return
to the last-selected device menu screen.
9. For future reference, write down each working device code in the
following boxes:
CBL Code:
Brand Name:________________________________
SAT Code:
Brand Name:________________________________
TV Code:
Brand Name:________________________________
DVD Code:
Brand Name:________________________________
AUD Code:
Brand Name:________________________________
VCR Code:
Brand Name:________________________________
AUX Code:
Brand Name:________________________________
CD Code:
Brand Name:________________________________
Programming A Device 15
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 15