Xiii. the nv-rc2 ir remote control (fig. 13) – Nuvo NV-E6DMS User Manual

Page 20

Advertising
background image

20

XIII. The NV-RC2 IR Remote Control

(Fig. 13)

The Essentia System comes with the RC2 remote con-
trol. This remote allows wireless control of all of the
keypad functions, as well as the functions of the NuVo
T3 Tuner. The four-backlit buttons at the top of the
remote allow you to choose which device the remote
will control. The numeric keypad is used to choose the
desired audio source, or tuner preset.

The RC2 remote is an ideal tool for teaching the NuVo
System functions to a universal learning remote con-
trol that can then operate the Essentia system as well
as all the individual source functions.

XIV. Changing the Buttons on the

Essentia Keypad (Fig. 14)

The Essentia keypads ship with 36 preprinted inter-
changeable source buttons. This allows you to easily
customize each keypad to match the audio components
being used in the system.

To change the buttons use a small screwdriver to
remove the outer Decora insert. This exposes two inner
plates that hold the buttons in place. Those are also
removed with a small screwdriver, allowing you to
remove and replace the desired source buttons.

Line up the tabs on the replacement buttons with the
corresponding holes in the keypad’s circuit board.
Once the new buttons are in place return the inner
plates and the outer keypad insert.

Fig. 13: NV-RC2 IR Remote Control

Fig. 14

NV-RC2 Remote

Learning Remote

ON

OFF

ALL
OFF

CD1

CD2

TNR1

TNR2

TNR3

SAT

VOLUME

LED12

LED13

LED14

LED15 LED16

LED17

LED18

Advertising
This manual is related to the following products: