Panasonic KX-WP1050E - Manual (Page 9)

15 16
For other troubleshooting, please see the Operating Instructions included
in the CD-ROM. You can also get up-to-date support information from our
website: http://www.panasonic.co.uk
Problem Cause/solution
The unit does not work. • Make sure the battery is installed correctly and
fully charged (pages 8-9).
• Check the connections (pages 2-5).
• Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
• The handset has not been registered to the
base unit. Register the handset (refer to the
Operating Instructions included in the CD-
ROM).
The Top menu of
the base unit is not
displayed. • Confi rm the new IP address by using the
handset. Select “Network details” in the
Idle mode option screen (5-B on page 11).
Enter the displayed IP address in the address
fi eld of the browser after http://.
7
Making / answering calls
7-A Making Skype calls
Using the contact list
1
{CONTACTS}
2
Select the desired Skype contact. i {{}
L You can search for a contact by entering a part of the display name.
Press the dial keys to enter the name, then press {^} or {V} to select
the desired contact from the candidates.
3
When you are fi nished talking, press {}}.
Note:
L
In step 1, you can also press {Menu} (middle soft key). i “Contacts”
i
{Select}
Using History
The following events are logged in the “History” menu: 50 missed calls,
20 incoming calls, 20 outgoing calls, 100 Voicemails and 20 authorization
requests.
1
{Menu} (middle soft key)
2
“History” i {Select}
3
Select the desired list. i {Select}
4
Select the desired log. i {{}
L
If you select a Voicemail log, press {Options}.
i
“Call” i {Select}
5
When you are fi nished talking, press {}}.
Note:
L
In step 1, you can also press {{} to access the outgoing calls list. i
Press {<} or {>} to switch between the outgoing calls, incoming calls
and missed calls lists, then skip to step 4.
7-B Making regular phone calls (SkypeOut)
SkypeOut is a way to make calls from Skype to persons who use landlines
or mobile phones. You must have Skype credit to make SkypeOut calls.
For more information, please visit http://www.skype.com/
1
Enter the phone number in the following way (even for local calls):
“country code” + “area code” + “local phone number”
Example (using the country code “1” for calling USA):
+ 1 555 321 5555
L
“+” (international prefi x) is automatically added.
L
For some countries, you may need to exclude “0” at the beginning of
the area code.
L
To correct a digit, press {CLEAR}.
2
{{}
3
When you are fi nished talking, press {}}.
7-C Answering calls
1
Press {{} or {s}.
2
When you are fi nished talking, press {}}.
To reject the call:
While the handset is ringing, press {}}.
Temporary ringer off:
While the handset is ringing, press {Silent}.
7-D Useful features during a call
Feature Operation
Using the
speakerphone Press {s} during a call.
L
To switch to the receiver, press {s} or {{}.
Reciver/Speaker
volume Press {^} or {V} repeatedly during a call.
Hold 1 Press {Hold} during a call.
2 To release hold, press {Resume} or {{}.
Mute 1 Press {MUTE} during a call.
2 To return to the conversation, press {MUTE} or {{}.
Call waiting 1 Press {Answer} to answer the 2nd call after the call
waiting tone.
2 To switch between calls, press {Switch}.
3 To resume conversation, press {Resume}.
8
Troubleshooting
Problem Cause/solution
I cannot make a call. • Confi rm the Ethernet cable is properly
connected (pages 2-5).
• If you cannot access Internet Web pages using
your computer, check to see if your Internet
service provider is having connection problems
in your area.
• Double-check your device connections against
the installation instructions (pages 2-5). The
order in which you turn on the devices is very
important.
• Many installation issues can be resolved by
resetting all the equipment. First, power down
your modem, base unit, router (if you have
one), and computer. Then, turn the devices
back on one at a time in this order: modem,
router, base unit, computer. If you use the
PPPoE connection, it may take a few minutes
or more to reset the PPPoE connection.