Panasonic KX-FP250 - Manual (Page 89)

89
H
e
lp
For Assistance, Call 1-800-435-7329
6 Insert the blue gear into the blue core of the new
film.
7 Insert the three green gears into the remaining
cores of the new film.
8 Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.
● The shiny side should be facing up.
Blue core
Blue gear
Guide tabs
Slots
Green gears
Guide tabs
Slots
Blue gear
Blue label
Cartridge
Film
9 Lock the four gears of the film by ( ) pushing
back the top side gears and ( ) pulling the
bottom side gears forward until they lock into place.
● If the film is slack, tighten it by winding the
bottom side gears.
B
A
Top
side gear Bottom
side gear
Bottom
side gears
Top side
gears
A B
Insert the film cartridge by matching the blue label
on the cartridge with the one on the unit.
Close the cover securely by pushing down on both
corners.
● The unit will check if the film is installed correctly.
The following message will be displayed.
Display:
● If the following message is displayed, the film is
not inserted correctly in the cartridge.
Reinsert it correctly.
CHECK FILM
PLEASE WAIT
Film
cartridge
Blue labels
Incorrect Correct
Tight
11
10
Ink Film