Panasonic KX-FP250 - Manual (Page 88)

88
Ink Film
For Assistance, Call 1-800-435-7329
How much film you have left
Replacing the film or film cartridge
To check the amount of remaining film, press while the unit is idle. The display indicates
the approximate amount of remaining film.
FILM REMAINING
FILM E F
FILM E F
When the film indicator points to this position, the remaining film will
print up to 25 pages of letter size documents. Prepare a new film or
film cartridge for replacement.
When the unit detects the end of the film, the following message will be displayed.
Display:
The remaining film prints about 15 pages of letter size documents.
Prepare a new film or film cartridge.
The film is empty. Install a new film or film cartridge.
The following replacement kits are available:
KX-FA135: Film cartridge (1 cartridge and 1 film)
KX-FA136: Replacement film (2 films)
To order replacement kits, see page 14.
FILM EMPTY
FILM NEAR EMPTY
1 Slide the cover open lever forward.
2 The cover is under tension to improve print quality.
Pull up hard enough to open.
3 Remove the film cartridge.
● If you have purchased a film cartridge (Model no.
KX-FA135) for replacement, skip to step 10.
● To replace only the film, go to step 4.
4 Unlock the four gears by ( ) pulling the top side
gears (blue and green gears) forward and ( )
pushing back the bottom side gears (green gears).
Remove the used film.
B
A
5 Remove the four gears from the used film cores.
Caution:
● The film is not reusable. You can order a new
film for replacement through your nearest
Panasonic dealer or call 1-800-435-7329.
Film cartridge
Cover open
lever
Blue gear
Top side gears
Green
gear
Bottom side gears
Green gear
Green
gear
A
B
A
B
Gears
Film cores
Gears
Display: