Error messages, Printed reports – Panasonic KX-FP250 User Manual

Page 78

Advertising
background image

78

Error Messages

For Assistance, Call 1-800-435-7329

Printed reports

When your fax does not transmit, check the following items first.
– The number you dialed is correct, and
– The other party’s machine is a facsimile.
If the problem remains, correct the problem by following the communication message printed on the sending
and journal reports (see pages 48 and 49).

Communication message

COMMUNICATION ERROR

DOCUMENT JAMMED

ERROR-NOT YOUR UNIT

MEMORY FULL

NO DOCUMENT

OTHER FAX NOT RESPOND

PRESSED THE STOP KEY

THE COVER WAS OPENED

OK

Error code

41–72

FF

54, 59

70

Cause & Remedy

A transmission or reception error occurred. Try again or check
with the other party.

The document is jammed. Remove the jammed document (p. 87).

A transmission or reception error occurred because of a problem
with the other party’s fax machine. Check with the other party.

The document was not received due to memory being full.

The document was not fed into the unit properly. Reinsert the
document and try again.

The other party’s fax machine was busy or ran out of recording
paper. Try again.

The document was not fed properly. Reinsert the document and
try again.

The other party’s fax machine rings too many times. To send a fax
manually, dial the number, confirm the fax tone, and press

.

The other party’s machine is not a facsimile. Check with the other
party.

The number you dialed is not in service.

The

button was pressed and fax communication was

canceled.

The cover was opened. Close it and try again.

Fax communication was successful.

STOP

START/COPY/SET

Advertising