Pioneer XM2GO - Manual (Page 34)

Settings
Settings 67 Settings 66
Settings
FM Modulator
Set the FM frequency that inno
transmits on.
Turn the FM modulator on or off
manually – or automatically when
inserted into a home or car dock.
Adjust the volume level of the
FM transmission.
FM Frequency
Your inno contains a built-in FM modulator (or FM transmitter) that allows you to listen to
whatever your inno is playing using an ordinary FM radio. All you have to do is set your inno
and the FM radio to the same frequency.
1. Place inno in the home or car dock.
2. Find an unused FM frequency on your FM radio. Note that FM frequency.
3. Select XM ➝ Settings ➝ FM Modulator ➝ FM Frequency.
4. Use the up and down arrow buttons to choose the same FM frequency as in step 2. You
should hear XM programming over your FM radio when your inno and radio frequencies
match.
5. Press the XM button to confirm your selection.
FM Mode
Choose one of these settings:
AUTO FM transmitter turns on when you place inno in the home or car docks. FM
transmitter turns off automatically when you undock inno. inno always
returns to AUTO when powered off.
ON Turns on the FM transmitter. When you use your inno in handheld mode, you
must manually turn on the FM transmitter and plug in the earbuds or travel
power cable (which acts as an FM antenna).
OFF Turns off the FM transmitter. Make sure you select this option when you’re
on an airplane.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 66