Linksys SRW224G4P - Manual (Page 51)

Chapter  Configuring the Switch
4 24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
SNMP > Group Membership
SNMP > Group Membership
User Name The name of the user connecting to the
SNMP agent . (Range: 1-32 characters)
Local Click the Local option to use the local SNMP
agent .
Remote The Internet address of the remote device where
the user resides . Click the Remote option and select an IP
address from the drop-down list .
Group Name The name of the SNMP group to which the
user is assigned . (Range: 1-32 characters)
Securty Model The user security model; SNMP v1, v2c
or v3 . (Default: v1)
Securty Level The security level used for the user:
noAuthNoPrv There is no authentication or encryption
used in SNMP communications . (This is the default for
SNMPv3 .)
AuthNoPrv SNMP communications use authentication,
but the data is not encrypted (only available for the
SNMPv3 security model) .
AuthPrv SNMP communications use both authentication
and encryption (only available for the SNMPv3 security
model) .
User Authentication
Authentcaton Protocol The method used for user
authentication . (Options: MD5, SHA; Default: MD)
Authentcaton Password A minimum of eight plain text
characters is required .
•
•
•
Data Privacy
Prvacy Protocol The encryption algorithm use for data
privacy; only 56-bit DES is currently available .
Prvacy Password A minimum of eight plain text
characters is required .
SNMP > Communities
You may configure up to five community strings authorized
for management access by clients using SNMP v1 and v2c .
All community strings used for IP Trap Managers should
be listed in this table . For security reasons, you should
consider removing the default strings .
SNMP > Communities
Communty Strng A community string that acts like a
password and permits access to the SNMP protocol .
Default strings: “public” (read-only access), “private” (read/
write access)
Range: 1-32 characters, case sensitive
Access Mode Specifies the access rights for the
community string:
Read-Only Authorized management stations are
only able to retrieve MIB objects .
Read/Wrte Authorized management stations are
able to both retrieve and modify MIB objects .
Enter a name and select the access rights from the Access
Mode drop-down menu . These strings act as passwords,
they are case-sensitive and can be up to 32 characters
long . Strings can be specified for read-only or read/write
access . Once this is entered, click Add .
•
•
•