Setup > network settings, Chapter, Configuring the switch – Linksys SRW224G4P User Manual

Page 19

Advertising
background image

Chapter 

Configuring the Switch

1

24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet

System Information

Seral Number

The serial number of the Switch is

displayed .

Model Name

The model name of the Switch is

displayed .

Hardware verson

The current hardware version is

displayed .

Boot Verson

The current boot version is displayed .

Frmware Verson

The current software version is

displayed .

System Locaton

Displays the location of the system if it

has been defined .

System Contact

The name of the administrator will

appear here if it has been defined .

System Uptme

Length of time the management agent

has been up .

Current Tme

Displays the current time .

PoE Information

Maxmum Avalable Power

Displays the maximum

power that can be supplied to a connected PoE device .

System Operaton Status

Displays the operational status

of the Power over Ethernet mechanism .

Manpower Consumpton

Displays the current number

of watts that the Switch is providing to PoE devices .

Setup > Network Settings

Setup > Network Settings

The Network Settings screen allows you to edit the
following information .

Identification

System Name

Specifies the name of the Switch . Enter

the name into the text field provided . By default, a system
name is not defined .

System Locaton

This field is used for entering a

description of where the Switch is located, such as 3rd
floor .

System Contact

Enter the name of the administrator

responsible for the system .

Object ID

The system object identifier is displayed here .

Base MAC Address

Physical address of a device mapped

to this interface .

IP Configuration

To manually configure IP settings, you need to set an IP
address and subnet mask compatible with your network .
You may also need to establish a default gateway between
the Switch and management stations that exist on another
network segment .

An IP address may be used for management access to the
Switch over your network . You may also need to establish
a default gateway between the Switch and management
stations that exist on another network segment .

Management VLAN

ID of the configured VLAN (1-4094,

no leading zeroes) . By default, all ports on the Switch are
members of VLAN 1 . However, the management station
can be attached to a port belonging to any VLAN, as long
as that VLAN has been assigned an IP address .

IP Address Mode

Specifies whether IP functionality is

enabled via manual configuration (Static), Dynamic Host
Configuration Protocol (DHCP), or Boot Protocol (BOOTP) .

NOTE:

If DHCP/BOOTP is enabled, IP will not

function until a reply has been received from the
server . Requests will be broadcast periodically
by the Switch for an IP address . If the mode is
set to DHCP/BOOTP and a server is not available,
you can reconfigure the settings by connecting
the console interface directly to a computer .

Select the IP Address Mode using the drop-down
menu . Selecting Static will allow you to enter a static IP
address, subnet mask and default gateway using the text
field provided . Selecting BOOTP or DHCP disables these
text boxes and auto assigns an IP address . The default
setting is Statc .

Host Name

Assign a host name to the Switch .

Advertising