Port status, Port configuration, Poe configuration – Linksys SRW224G4P User Manual

Page 16: Port status port configuration poe configuration, Chapter 4, Configuration using the console interface

Advertising
background image

12

Configuration Using the Console Interface

24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet

Chapter 4

Back to Main Menu

Select Back to Man Menu if you want to return to the
main menu .

Port Status

The Port Status screen allows you to view the status of
a port . The Port, Enable, Link Status, Spd/Dpx, and Flow
Control are displayed .

Port Status

Ports 1 through 24 are Ethernet RJ-45 ports and are
all 10/100 ports . Ports G3 and G4 are shared with the
miniGBIC ports . If there is a connection to one of the
miniGBIC ports then the corresponding Gigabit RJ-45 port
cannot be used .

Port Configuration

You can use the Port Configuration screen to enable/
disable an interface, set auto-negotiation and the interface
capabilities to advertise, or manually fix the speed, duplex
mode, and flow control .

Port Configuration

Enable

Allows you to manually enable or disable an

interface . You can disable an interface due to abnormal
behavior (for example, excessive collisions), and then
enable it again, once the problem has been resolved . You
may also disable an interface for security reasons .

Auto-negotaton (Port Capabltes)

This option enables or

disables auto-negotiation . When auto-negotiation is enabled,
you need to specify the capabilities to be advertised . When
auto-negotiation is disabled, you can force the settings for
speed, mode, and flow control . The following capabilities are
supported .

10half

Supports 10 Mbps half-duplex operation

10full

Supports 10 Mbps full-duplex operation

100half

Supports 100 Mbps half-duplex operation

100full

Supports 100 Mbps full-duplex operation

1000full

Supports 1000 Mbps full-duplex operation

Default: Auto-negotiation enabled; Advertised capabilities
for 100Base-TX – 10half, 10full, 100half, 100full; 1000Base-
T – 10half, 10full, 100half, 100full, 1000full; 1000Base-SX/
LX/LH (SFP) – 1000full; 100Base-FX (SFP) – 100full

Speed/Duplex

Allows manual selection of port speed and

duplex mode (that is, with auto-negotiation disabled) .

Flow Control

Allows automatic or manual selection of

flow control .

PoE Configuration

The PoE Main Menu screen displays three menu choices
and a back option:

PoE Main Menu

System PoE Configuration

Port PoE Status

Port PoE Configuration

1 .

2 .

3 .

Advertising