Chapter 4, Configuration using the console interface – Linksys SRW224G4P User Manual

Page 15

Advertising
background image

11

Configuration Using the Console Interface

24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet

Chapter 4

SNMP

SNMP Server

Enable or Disable the SNMP function for

the Switch .

SNMP Server Port

Set the TCP port that will be used for

sending and receiving SNMP packets .

Network Diagnostics

The Network Configuration screen allows you to use PING
to test network connectivity . Enter the IP address of
the interface or device you wish to PING and select the
Execute action .

Ping

File Management

The File Management screen allows you to upload and
download files to the Switch using TFTP .

File Management

Source Fle

Specify the location of the file to transfer .

Select one of the following:

TFTP

If the file is located on a TFTP server .

Image

If the file is a software code file .

Startup-confg

If the file is a configuration file .

Destnaton Fle

Specify where the file is to be transferred .

Select one of the following:

TFTP

If the file is to be uploaded to a TFTP server .

Image

If the file is to be downloaded as a software

code file .

Startup-confg

If the file is a configuration file

Boot

If the file is a boot file .

Fle Name

Enter the name of the file to be uploaded or

downloaded .

IP Address

Enter the IP address of the TFTP server that

will transfer the file .

Restore System Default Settings

To restore the Switch back to the factory default settings,
select Restore System Default Settng and press Enter .
A confirmation message appears asking Are you sure? [Y/
N]
. Press the Y key to continue or the N key to cancel the
action .

Restore Default

Reboot System

If you want to restart the Switch, select Reboot System
and press Enter . A confirmation message appears asking
Reboot Now? [Y/N] . Press the Y key to continue or the N
key to cancel the action .

Reboot System

Advertising