Linksys SRW224G4P - Manual (Page 13)


Configuration Using the Console Interface
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Chapter 4
Versions
The Versions screen displays the Boot Version, Software
Version, Loader Version and the Hardware Version .
Versions
Boot Verson This file runs when the Switch is turned on .
It performs power-on diagnostics and loads the operating
system for the Switch .
Software Verson This file contains the programming
code that runs the Switch .
Loader Verson This file loads the software from storage
memory to main memory .
Hardware Verson The current hardware setup of the
Switch .
General Information
The General Information screen displays the System
Description, System Up Time, System Mac Address, System
Contact, System Name and System Location .
General Information
Management Settings
The Management Settings screen displays the Serial Port
Configuration .
Management Settings
Serial Port Configuration
The Serial Port Configuration screen displays the current
setting for the baud rate . The baud rate can be changed by
selecting Edt then using the spacebar to toggle through
the different baud rates . Use the Save action to set the
new baud rate .
Serial Port Configuration
User & Password Settings
The User & Password Settings screen displays user account
information on the Switch . The default account is the
admn account . To add a new user, use the arrow keys to
select Edt and then press the Enter key, then enter the
user name of the new account and assign a password to
the account . The password must be re-entered into the
Agan Password column to confirm the password .
User & Password Settings