Controls and features – Lincoln 1999 Town Car User Manual

Page 74

Advertising
background image

Memory seat/mirrors feature (if equipped)

The remote keyless entry system can also control the memory
seats/mirrors feature. With this feature, the first two programmed
transmitters will recall a different memory position.

Press the control once to unlock the
driver’s door and move the memory
features to the corresponding
memory position, just as if you had
pressed the memory control in the
vehicle.
• transmitter #1 will recall memory

feature position one.

• transmitter #2 will recall memory

feature position two.

• If a third or fourth transmitter is added, it will not recall a memory

position.

Memory seat positions can be changed at any time. Transmitter #1 will
always move the memory features to position #1.

Reactivating the memory seat/mirrors feature

The remote memory seat/mirrors feature comes disabled from the
factory. The following sequence will reactivate the transmitter:

1. Press the SET control.

2. Press any control on the remote
entry transmitter.

3. Within five seconds, press control
one or two.

Deactivating the memory seat/mirrors feature

1. Press the SET control.

2. Press any control on the remote
entry transmitter.

3. Within five seconds, press the
SET control again.

Manually moving any seat or mirror during these steps will cancel the
programming procedure.

SET

1

2

SET

1

2

Controls and features

74

Advertising