Kodak ESP 3260 - Manual (Page 20)

Printing Pictures
14 www.kodak.com/go/aiosupport
5. Press to select the option you want to change (for example, Quantity, Print
Size, Color, Scene Balance, or Add Date to Print).
6. Press to change the selection.
7. Repeat steps 5 and 6 for each option you want to change.
8. When you are done changing options, press to select View Photos, then
press OK.
9. Insert the memory card into the memory card slot.
10. Press or to select the picture you want to print, then press OK. A check
mark on the LCD indicates the picture is selected.
NOTE: To deselect the picture, press OK again.
11. To select additional pictures, press or until the picture is displayed, then
press OK.
12. When you are done selecting pictures, press Start to begin printing.
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the
printer while printing.
Printing tagged
pictures Some digital cameras let you tag (or “mark”) pictures on the memory card for
printing. This creates a tag that is recognized by the printer. If you choose to print
tagged pictures, they will be printed according to the default settings on your printer
(unless otherwise specified by the tag from the camera).
NOTE: Refer to your camera user guide to determine whether your camera supports
tagged (also “marked” or “DPOF”) functionality.
To print tagged pictures:
1. Load photo paper with the logo side facing up (see Loading photo paper,
page 9 ), and move the left paper-edge guide until it touches the paper.