Klark Teknik DN9344E User Manual

Page 59

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


59 of 65

To connect Ethernet and non-Ethernet units in an Ethernet/serial system

The PC is connected to the first Ethernet unit using one of the options in Section 7.3. The Ethernet units

are connected together using one of the options in Section 7.2. The last Ethernet unit is connected to a

Lantronix UDS1100 Ethernet-to-serial converter via an Ethernet cable. The Lantronix converter is then

connected to the first non-Ethernet unit via serial RS-485 cabling. All of the non-Ethernet units are
connected together in a daisy-chain configuration using RS-485 cabling.

To set up the Lantronix UDS1100 converter, see Section 9.3.

Advertising
This manual is related to the following products: