Klark Teknik DN9344E User Manual

Page 54

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


54 of 65

The HELIX RCS will work through the ticked units in the list, setting each online in turn. As the

download/upload takes some time to complete, the current progress is tracked by the status indicators
to the right of the list while more specific progress remarks are displayed in the Comments column, for

example, success or failed to go online. On completion, remember to relock the Preset Memories!

To Store/Recall settings to/from a specific Memory number, across multiple units

1

Switch to the Store \ Recall Memory tab.

2

Select the User or Preset Memory to be stored/recalled from the drop down list to the

right of the ‘tick list.

Note

Settings cannot be stored to Preset memories on an individual basis; if you select a Preset
Memory location, the Store button is faded out. To store a Preset memory you must use the

write all command - this downloads each PC memory only to the equivalently numbered Unit

Memory, thus providing an extra safeguard against accidentally overwriting essential settings.

3

Tick the † check box of each Unit that you wish to include in the store/recall.

4

Set the Synchronisation to Get All Initial values from the Audio System or Set All Initial
values from Computer, as required.

5

Click Recall From Memory or Store To Memory as required.

The HELIX RCS will work through the ticked units in the list, setting each online in turn. Progress is

tracked by the status indicators to the right of the list and more specific progress remarks are displayed
in the Comments column.

To return to the FastNav

®

screen, click Exit.

Current progress is

shown by the status bar

All or a subset of
Units can be
selected for

updating

Check the

synchronise

direction before

starting the

global

recall/store

Either a User or
Preset memory
can be selected

Advertising
This manual is related to the following products: