Klark Teknik DN9344E User Manual

Page 47

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


47 of 65

3

If an asterisk appears in the Valid column, the chosen solo button is already assigned to
another HELIX channel; the conflicting HELIX channel will also be marked with an asterisk.

Select another Solo Source and Num combination for one or other of the HELIX channels to
resolve the conflict.

If required, click on Reset STS to quickly clear all the current solo assignments.

To write the settings to the DN9340 unit that is currently configured for Solo Tracking

1

In the System Solo Tracking Setup screen, select the DN9340 HELIX unit you wish to write

to from the Target Helix Unit drop down list. The Target Helix field defaults to the Master Unit
specified in the Function Lockout screen (see Section 7.8).

2

Click on Write To Unit. You are warned that this will overwrite the data in the unit and are
asked to confirm the action.

Note

If the Write To Unit button is dimmed, you need to set the selected target unit online.

3

Click Yes to continue or No to abort.

4

Click Exit to close the screen when finished.

Hint

Advertising
This manual is related to the following products: