8 protecting system settings – Klark Teknik DN9344E User Manual

Page 48

Advertising
background image

HELIX DN9340E/DN9344E Remote Control Software

User Guide


48 of 65

7.8 Protecting System Settings

To protect against unauthorised users tampering with key parameters that may affect preset room

equalisation or result in equipment damage, a password protected lockout can be set up via the HELIX
RCS show file using the screen shown below. The lockout settings and password are downloaded to a

specified master unit, generally the DN9340 HELIX with Solo Tracking, such that the system is still

protected when taken out of remote control.

To open the System Solo Tracking Setup screen

Switch to the FastNav

®

screen and choose Function Locking.

Initially, when you open the screen the fields will be dimmed out. To access the fields you must enter

the current password. Once accessed, you can:

Lock out all or some of the EQ screens for all add-ins (and equivalent Unit menu pages via

Master Unit).

Freeze the Delay and Gain settings for all add-ins (and equivalent via Master Unit).

Secure linked channels settings.

To change lockout settings

1

Type in the password and click Enter Password. Provided you entered the correct password,
the fields will become active. If the password is incorrect, an error prompt is displayed and

another attempt may be made.

Note

If you have not previously set a password this will default to ‘password’ (all lower

case). Password traffic is one way only from the HELIX RCS to the Master Unit; they

are not uploaded with the Get All data command.

2

If necessary, select the Master Unit from the associated drop down list. Helix RCS will confirm
the change has been made. Click OK to continue.

3

Tick the check boxes of the locks you wish to apply.

4

Click OK.

Graphic, Parametric

and/or Dynamic EQ

settings can be locked

out separately

Settings are

protected by

password

access

Lockout settings are
downloaded to the master unit,

e.g. the Solo Tracking DN9340

Advertising
This manual is related to the following products: