KITCHENAID W10118037B - Manual (Page 15)

15
Option 1: Solid surface countertop
Attach dishwasher to the side cabinet mounting brackets
(installed earlier).
Option 2: Wood countertop
Attach the dishwasher to the countertop using the folded
over mounting tabs located on the top of the dishwasher.
Complete Installation
1. Pull top drawer slide rails out and set top drawer on slide
rails.
2. Pull slide rails forward until they snap into position.
3. Push top drawer in and repeat above steps for bottom
drawer.
4. In the cabinet under the sink, coil excess drain hose and wrap
with a zip tie. Plug in dishwasher or reconnect the power.
5. Select the Rinse Only cycle and press START/RESUME.
Allow the dishwasher to fill, rinse and drain. Check for leaks.
If leaks are found, secure the connection and repeat this step.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the User
Instructions or contact the dealer from whom you purchased your
dishwasher.
A. Attach dishwasher to side cabinet mounting brackets.
A. Attach dishwasher to countertop using folded over mounting tabs.
1
A
1
2
A
2
2
1
1
ON
OFF
ON
OFF
OFF