Heading, Trouble shooting guide continued – Sunbeam EM8910 User Manual

Page 44

Advertising
background image

Heading

PROBLEM

POSSIBLE CAUSE

WHAT TO DO

No espresso/coffee,

Foreign matter is caught in the Turn the machine off and remove

only water is running grinding mechanism stopping

the hopper. Clean away any coffee

out

the beans from moving through beans in and around the grinding

the grinder.

mechanism. Remove the grinding

ring and with the cleaning brush or

tweezers remove any foreign

matter. See page 26, Removing

foreign matter from the grinding

mechanism.

Coffee bean hopper is not

The grinder is working however

fitted correctly.

there is no sound of coffee beans

grinding. Remove the hopper and

empty the coffee beans into a

container. Replace the hopper onto

the grinding mechanism, check

that the lock on the base of the

hopper opens once it is in the

coffee bean position, if it remains

closed while turning the hopper,

remove the hopper and try

engaging it again. Therefore push

down on the hopper with pressure,

whilst turning.

Brewing unit is not

Should the grinder be working

in the correct position.

normally, remove the coffee waste

container after the espresso making

process and check to see if there

is any freshly ground coffee. In this

case turn the machine off, remove

and clean the brewing unit.

No espresso/coffee,

Coffee bean hopper is not in

Adjust the hopper so that the arrow

only water is running the correct position.

on the base of hopper is aligned

out when using

with the pre-ground coffee arrow.

pre-ground coffee.

The pre-ground coffee

When the machine is turned on

receptacle was filled when the it will go through an Auto Clean

machine was switched off.

cycle, this will discard any

coffee grinds from the coffee

brewing unit. Therefore ensure the

machine is on and in the pre-

ground position before adding

coffee.

Trouble Shooting Guide continued

42

Advertising