Trouble shooting guide – Sunbeam EM8910 User Manual

Page 43

Advertising
background image

41

Espresso/coffee is

The internal brewing system

The first cup is always colder than

not hot enough

is cold.

any following cups as the brewing

unit has to warm up. Heat the

brewing unit by running the 8

minute cleaning program

without using the cleaning tablet.

See page 36, Starting the cleaning

program.

The cups have not

Before making an espresso, fill the

been pre-heated.

glass or glasses with hot water.

Once you are ready to pour the

espresso discard the hot water.

This will quickly heat the glasses

and significantly improve and

retain the drinking temperature of

the espresso.

Espresso/coffee not

The coffee bean hopper

Refill the hopper with coffee

strong enough

is empty.

beans.

The grind setting is too coarse. Adjust the grind selector to a finer

setting. See page 26, Setting the

fineness of the grind.

The setting for the coffee

Select a higher setting of the

strength/quantity is too low.

coffee strength/quantity. See page

14, Selecting the strength of the

coffee.

Not enough pre-ground

Use the correct amount of pre-

coffee used.

ground coffee – 2 level measuring

spoons.

Espresso/coffee pour The coffee grind setting is

Adjust the grind selector to a

is too slow

too fine.

coarser setting. See page 26,

Setting the fineness of the grind.

Espresso/coffee pour The coffee grind setting is

Adjust the grind selector to a finer

is too fast

too coarse.

setting. See page 26, Setting the

fineness of the grind.

Espresso/coffee pour The espresso pour spouts

While the espresso is pouring

is uneven

are clogged.

reposition the adjustable espresso

pour spout, down or up.

Alternatively remove the adjustable

espresso pour spout, rinse under

running water and with a pin

scrape away any built up coffee

remains.

Trouble Shooting Guide

PROBLEM

POSSIBLE CAUSE

WHAT TO DO

Advertising