Running the descaling program – Sunbeam EM8910 User Manual

Page 40

Advertising
background image

The descaling program allows for simple and
effective descaling of the espresso machine.
Scale is a surface build up of minerals that
naturally occur over time in all appliances
that are involved with the heating of water.
The espresso machine should be descaled
at regular intervals of 4 – 6 months, at the
latest however when you are instructed to do
so by the display indication
<<DESCALING REQUIRED>>.
The descaling process is carried out in 2
phases, takes 45 minutes and should not be
interrupted. If the program is interrupted, the
descaling process has to be started again.
Important: Prior to starting the descaling
program, clean the coffee brewing unit and
empty the coffee waste container.
Important: Use Sunbeam descaling tablets
only. If using other descaling agents,
Sunbeam will not be liable for any damage.
Do not, under any circumstances use vinegar,
citric acid, amidosulphuric acid or descalants
containing amidosulphuric acid, as these
agents can damage the espresso machine.
Sunbeam descaling tablets (EM0010) are
available from selected appliance retailers or
from Sunbeam on 1800 025 059.

• Press the “MENU” button. The menu

setting <<LANGUAGE>> appears.

• Press the scrolling buttons

or ▼ until

the menu setting <<DESCALE >> appears.

• Confirm the menu setting by pressing the

“OK” button. The display shows <<START
DESCALE>>.

• Confirm with the “OK” button. The display

shows <<DESCALING INSTRUCTIONS>>.

Important: To prepare for descaling, follow the
instructions on the display then press “OK”
to confirm that you have done so.
• <<REFILL WATER (MIN. 800ML)>>

– press “OK”

Remove the water reservoir, fill it with at
least 800ml of warm water. Then press the
“OK” button.
• <<PLACE TABLETS IN WATER

RESERVOIR>> – press “OK”

Place 2 descaling tablets in the water
reservoir. Replace the water reservoir into
the espresso machine after the tablets have
dissolved, this takes approximately 5-7
minutes. See figure 61. Then press the “OK”
button.

38

Figure 61

Figure 62

Running the descaling program

Advertising