Sunbeam EM8910 - Manual (Page 34)

32
Cleaning the grinder
• Switch the espresso machine off by pressing
the ‘POWER’ button and unplug the power
cord from the power outlet.
• Turn the ‘coffee bean hopper’ to the position
marked ‘HOPPER RELEASE’ and take it off.
See figure 43.
• Remove any coffee beans in the grinding
mechanism. We suggest using the cleaning
brush supplied with the Sunbeam Intuitive
Digital (or, possibly a vacuum cleaner with a
hose or nozzle). See figure 44. If any foreign
matter cannot be removed, proceed with the
next step.
• Slide the ‘grinding mechanism release’
button to the front in the direction of the
grinding mechanism. Hold this position and
turn the ‘coffee grind’ lever clockwise by
approximately 1 revolution up to the stop.
See figure 45.
• Now detach the grinding ring by lifting it out
and remove any foreign matter(s).
See figure 46.
Important: There is risk of injury by turning
grinding gear. Never switch the espresso
machine on while working with the grinding
mechanism. This may cause severe injury.
Always unplug the power cord.
• Replace the grinding ring.
• Slide the ‘grinding mechanism release’
button to the front in the direction of the
grinding mechanism. Hold this position and
turn the ‘coffee grind’ lever anti-clockwise to
the desired grind setting.
• Replace the ‘coffee bean hopper’ in position
‘HOPPER RELEASE’ and turn it to the
coffee beans position. Now test the function
of the grinding mechanism with a small
quantity of beans and make a cup of coffee.
Care and cleaning (continued)
Figure 44
Figure 46
Figure 43
Figure 45