Sunbeam EM8910 - Manual (Page 27)

25
Programming the espresso pour volume (continued)
Note: When you save the espresso pour
volume in coffee bean mode, firstly the
grinder starts and grinds the coffee. Keep
the “OK” button pressed until the desired
espresso pour volume is reached.
• Release the button once your desired
espresso pour volume is reached. This
volume is now saved. The display briefly
indicates <<PROGRAMMED>>.
• Repeat the action if you would also like
to adjust the espresso pour volume for the
other cup sizes.
Changing and saving the coffee strength/
quantity
This is only possible with coffee bean mode,
not for use with pre-ground coffee. Should
your taste change or you find the coffee too
strong or too weak, you can change just the
coffee strength/quantity without changing the
espresso pour volume.
• First press the “espresso pour volume”
button until the desired cup symbol
is selected or the desired cup size is
indicated on the display for which you want
to adjust the coffee strength/quantity. The
display shows e.g. <<1 CUP LARGE>>.
See figure 31.
Note: The top line in the display indicates
the selected cup size. The bottom line in the
display always shows the coffee strength/
quantity you have saved previously for this
espresso our volume, e.g. <<STRONG>>.
• Next press the “coffee strength/quantity”
button until the desired coffee quantity
symbol is illuminated or the desired coffee
quantity is indicated on the display. The
display shows e.g. <<MILD>>.
See figure 32.
• The value is now saved.
• Repeat the process if you would also like
to adjust the coffee strength/quantities for
other espresso pours volumes.
Important: Be sure to follow the order; first
select the espresso pour volume, then the
coffee strength/quantity.
Note: The saved quantities remain stored
when the espresso machine is switched off.
Figure 34