Sunbeam EM8910 - Manual (Page 19)

17
Selecting espresso pour volume/size
Depending on your taste, select a short,
standard or a long espresso pour.
• For this press the 'espresso pour volume'
button until the desired cup symbol is
selected or the desired cup size is indicated
on the display. See figure 22.
The cup sizes are indicated as follows:
20mLs <<SMALL VOLUME>>
30mLs <<MEDIUM VOLUME>>
40mLs <<LARGE VOLUME>>
NOTE: The bottom line on the display shows
the coffee strength/quantity. The procedure
for changing this is explained in the following
section.
NOTE: The Sunbeam Intuitive Digital is set to
standard volumes. Instructions for changing
the set coffee volumes can be found in
section "Programming the espresso pour
volume: on page 24.
Setting the number of cups and dispensing
coffee
• Place one or two cups under the espresso
pour spouts. The height of the pour spouts
can be adjusted to suit the height of your
cup to reduce heat loss and espresso
splashes. Simply slide the espresso pour
spouts up or down. See figure 23.
• Press the button once or twice in
order to select 1 or 2 cups. See figure 24.
LCD: Indicates <<1 CUP>> or
<<2 CUPS>>.
• Press the "OK" button.
• The espresso is now made.
Making an espresso with pre-ground coffee (continued)
Figure 23
Figure 24
Figure 22