Wireless network – Samsung BDC5500/XAA User Manual

Page 37

Advertising
background image

English



05
Setup

Setting Up a Wired Connection - Manual
If the Auto Setting does not work, you’ll need to

set the Network Setting values manually.

To get the Network setting values from most

Windows computers, follow these steps:

Right click the Network icon on the bottom

right of the screen.
In the pop-up menu, click Status.
On the dialog that appears, click the Support

tab.
On the Support tab, click the Details button.

The Network settings are displayed.

To enter the Network settings into your player,

follow these steps:

On the Internet Protocol Setup screen, press

the ENTER button.
Press the ▲▼ buttons to select Manual, and

then press the ENTER button.
Press the ▼ button to go to the first entry field

(IP Address).

Use the number buttons on your remote to

enter numbers.
When done with each field, use the ► button

to move successively to the next field.

You can also use the other arrow buttons to

move up, down, and back.
Enter the IP Address, Subnet Mask, and

Gateway values.
Press the ▼ button to go to DNS.
Press the ▼ button to go to the first DNS

entry field. Enter the numbers as above.

1.

2.
3.

4.

1.

2.

3.

4.

5.

6.

7.
8.

Press the RETURN button on your remote.
Run a Network Test to ensure the player has

connected to your network (See page 39).

Wireless Network

You can setup the wireless network three ways:

Using PBC (WPS)

Using the Auto Network Search function.

Manually.

Each method is described below.

Setting Up the Wireless Network Connection

- PBC (WPS)
The easiest way to set up the wireless network

connection is using the PBC (WPS) function.

If your wireless router has a PBC (WPS) button,

follow these steps:

In the Network Settings menu, press the ▲▼

buttons to select Network Setting, and then

press the ENTER button.

The Internet Protocol Setup screen appears.
Press the RED(A) button on the remote

control.
Press the PBC (WPS) button on your router

within two minutes. Your player displays the

Network Selection Screen, and automatically

acquires all the network setting values it

needs and connects to your network. When

it is done, it displays an OK button. Press the

ENTER button on your remote.
After the network connection is set up, press

the RETURN button to exit the Network

Setting screen.

9.
10.

1.

2.

3.

4.

Display
Audio
System

Network

Language
Security
General
Support

Settings

Network Setting

Internet Protocol Setup : Manual

\

IP Address

: 0 0 0 0

Subnet Mask

: 255 255 255 0

Gateway

: 0 0 0 0

DNS

: Manual

DNS Server

: 0

0

0

0

>

Move " Select ' Return

Advertising
This manual is related to the following products: