Sony SPP-SS966 - Manual (Page 10)

Getting Started 10 US
Notes
• Use only the supplied AC-T46 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base phone close to the AC outlet so that
you can unplug the AC power adaptor easily.
Tips
• If your telephone outlet isn’t modular, contact your
telephone service company for assistance.
• To remove the wall bracket, press in the upper tab.
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is Set the switch to
Tone T
Pulse P
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
Polarity of the plug
Step 2: Setting up the base phone (continued)
DIAL MODE switch
Modular
–
+