4 commissioning - other operating systems, 1 commissioning - guide – Siemens Simatic Industrial PC IPC427C User Manual

Page 42

Advertising
background image

Commissioning

7.4 Commissioning - other operating systems

SIMATIC IPC427C

42

Operating Instructions, 04/2009, A5E02414743-01

7.4

Commissioning - other operating systems

7.4.1

Commissioning - guide

The desired operating system can be installed on the hard disk, CompactFlash card or SSD

drive. A variety of USB devices (hard disk, external floppy or CD-ROM drive, USB stick) or

Compact Flash cards can be used as boot media.

,QVWDOOLQJWKH
RSHUDWLQJV\VWHP
IURPWKHERRWPHGLXP

6HOHFWLQJWKHDFWLYH
ERRWPHGLXP

&RPPLVVLRQLQJ
6,0$7,&,3&&

6HOHFWLQJFUHDWLQJ
WKHERRWPHGLXP
IRULQVWDOODWLRQ

The following provides an overview of the steps involved in commissioning:

Steps

Description

1 Select and create a boot

medium for installation.

Select a suitable boot medium for the operating system to be

used in the BIOS Setup (CD-ROM drive, Compact Flash card,

hard disk or USB device). See Boot menu (Page 126).
If no boot medium is available, one must be created based on

the instructions provided by the respective operating system

documentation.
For example, you can use the SIMATIC PC/PG Image Creator

tool to make a USB stick a bootable medium.

2 Install the operating system

on the boot medium.

Install the operating system based on the instructions provided

by the respective documentation.

3 Select final boot medium

In the BIOS Setup, select the medium on which the operating

system has been installed.

Additional information

Further information about installation and commissioning is available in the documentation of

the respective operating system.

Advertising