5 mounting with mounting brackets – Siemens Simatic Industrial PC IPC427C User Manual

Page 30

Advertising
background image

Installing/mounting

5.5 Mounting with mounting brackets

SIMATIC IPC427C

30

Operating Instructions, 04/2009, A5E02414743-01

5.5

Mounting with mounting brackets

Removing mounting clamps from the device

Two mounting clamps are factory installed on the device for DIN rail mounting. These need

to be removed before mounting the mounting brackets.

Steps for removing the mounting clamps
Remove the four screws ② and

the two mounting clamps ① from

the back of the device.

Installing brackets on the device

Two mounting brackets are included in the device package. They can be installed on the

device with four screws supplied.

Steps for installing the mounting brackets
Install the mounting brackets on the

device.

Note
Required tools
You need a TORX T20 screwdriver to remove the mounting clamps and mount the mounting

brackets.

Advertising