Directly entering the frequency, Direct tuning – Sony ICF-SW7600GR User Manual

Page 16

Advertising
background image

Listening to the radio

16

GB

Directly entering the
frequency

— Direct tuning

If you know the frequency of the station you want to listen to, you can
use the number buttons for quick and accurate tuning.

1

4

5

2

3

1

Press POWER ON/OFF to turn on the radio.

2

Press FM/AM to select either band.

To listen to SW (short wave), MW (medium wave) or LW (long
wave) broadcasts, select AM.

3

Press DIRECT.

The frequency disappears from the display.
Perform Step 4 within 10 seconds.
Otherwise, the unit will return to the
condition prior to Step 3. In this case, repeat
from Step 3. In addition, perform steps after
Step 4 within 10 seconds as well.

4

Press the number buttons and input the frequency of
the desired station.

FM band: You can ignore the decimal point.

Example: To enter 89.5 MHz, press 8, 9 and 5.

AM band: You can ignore the last 3 digits if they are all zero.

Examples: To enter 810 kHz, press 8, 1 and 0.

To enter 10 000 kHz, enter 1 and 0.
To enter 12 095 kHz, enter 1, 2, 0, 9 and 5.

The minimum frequency step for direct input is 0.05 MHz (50 kHz)
for FM and 1 kHz for AM.

5

Press EXE.

The unit will tune in to the entered
frequency. “

TUNE

” will appear in the

display when the station is tuned in.

TVOLUME

(adjust the
volume)

Advertising