Samsung ML-1610 - Manual (Page 67)

S OLVING P ROBLEMS
5.16
Troubleshooting Error Messages
When the printer experiences an error, the control panel will indicate
an error message with the indicator lights. Find the light pattern below
that matches the printer light pattern and follow the solutions to clear
the error.
LED status legend
LED pattern Possible Problems and Solutions
Your system has some problems. If this problem
occurs, contact your service representative.
On Line/Error
LED lights red
• Paper jam occurs. To solve the problem, see
“Clearing Paper Jams” on page 5.6.
• The front cover is open. Close the front cover.
• Paper tray is empty. Load the paper in the Tray.
• The toner cartridge is out of toner. Remove the old
toner cartridge and install a new one. See
“Installing the Toner Cartridge” on page 2.4.
• You pressed the Cancel button while the printer is
receiving data.
• In Manual Feed mode, there is no paper in the tray.
Load paper into the tray.
• If the printer is receiving data, the On Line/
Error LED slowly blinks green.
• If the printer is printing the received data, the On
Line/Error LED blinks green fast.
• If the printer does not have enough memory, the
On Line/Error LED blinks red. In this case,
output quality will be low, or an Internal error
sheet will print. Simplify the page layout and
remove unnecessary graphics from your job.
symbol for “light off”
symbol for “light on”
symbol for “light blinking”