Siemens Gigaset 4015 - Manual (Page 52)

46
Press Keys:
Connecting the Base Station to a PBX
Connecting the Base Station
to a PBX
Your Gigaset may be operating behind a PBX.
Changing the Dialing Mode
It is necessary to change the dialing mode only if
your PBX does not operate with the preset tone di-
aling (DTMF – dual-tone multifrequency). Please re-
fer to the operating instructions of your PBX.
Options:
• Tone dialing (DTMF),
• Pulse dialing (P).
NNNNNNNNNNNN
MENU Open the Menu.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN 
BASE SETT

Scroll to Base Settings and press OK.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN 
SPECIAL FCT

Scroll to Special Functions and press OK.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DIAL MODE

Select Dial Mode and press OK.
NNNNNNN NNNNNNN  
Scroll to the desired dialing mode and press OK.
Setting the Flash Time
Prerequisite:
Your PBX requires a flash time different from the
preset flash time. Please refer to the operating in-
structions of your PBX.
NNNNNNNNNNNN
MENU Open the Menu.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN 
BASE SETT

Scroll to Base Settings and press OK.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN 
SPECIAL FCT

Scroll to Special Functions and press OK.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN 
FLASH TIME

Scroll to Flash Time and press OK.
NNNNNNN NNNNNNN  
Scroll to the required flash time and press OK.
Options (in milliseconds):
80, 100, 120, 180, 250, 300, and 800
The current setting is marked with a
'
.