Assemble surface burners, Installation instructions, Caution – Mabe Canada JGB918 User Manual

Page 50

Advertising
background image

Installation Instructions

ELECTRICAL CONNECTIONS

(CONT.)

3

B. Usage Situations where Appliance Power Cord will

be Disconnected Frequently.

Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the two-
prong wall receptacle replaced with a three-prong
(grounding) receptacle by a qualified electrician
before using the appliance.

The installation of appliances designed for mobile
home installation must conform with the Manufactured
Home Construction and Safety Standard, Title 24 CFR,
Part 3280 (formerly the Federal Standard for Mobile
Home Construction and Safety, Title 24, HUD, Part
280) or, when such standard is not applicable, the
Standard for Manufactured Home Installations, latest
edition (Manufactured Home Sites, Communities and
Set-Ups), ANSI A225.1, latest edition, or with local
codes. In Canada, mobile home installation must be
in accordance with the current CAN/CSA Z240/MH
Mobile Home Installation Code.

Electric Disconnect

■ Locate disconnect plug on the range back.
■ Pinch sides of connector and pull out of range back.

SEAL THE OPENINGS

4

Seal any openings in the wall behind the range and in the
floor under the range when hookups are completed.

50

ASSEMBLE SURFACE BURNERS

Assemble the side burners as shown.

Assemble the center burner. Make sure that the
center griddle sits square and level between the
side grates.

CAUTION:

Do not operate the burner

without all burner parts in place.

Place the burner caps on the cooktop. Make sure
that the caps are placed in the correct locations.
There is one oval (center) head and cap assembly,
one small cap, one medium cap, one large cap, and
one extra large cap.

B

A

5

Advertising
This manual is related to the following products: