Grundig GUSR91DAB - Manual (Page 5)

4
2
Turn the power switch on the rear of the unit to the ON position.
1
Connect the small end of the mains lead to the AC input socket on the rear of the unit.
Connect the 3 pin plug to a suitable wall socket.
Using Headphones
A pair of headphones (not supplied) with a 3.5mm diameter stereo plug and 8-32 ohm
impedance is required. Plug the headphones into the Headphone Socket on the side of
the DAB Radio.
When headphones are connected, the sound to the speakers is automatically turned
off.
3
Insert 6 “C” type batteries into the battery compartment, following the polarity
diagram on the inside.
Replace the Battery Compartment Cover.
4 Using the DAB Radio with Batteries
The DAB Radio can be powered by 6 “C” types Batteries. This allows the
DAB Radio to be used outside or away from wall sockets.
To remove the Battery Compartment Cover, press the 2 retaining clips firmly and pull
away from the DAB Radio.
Using AUX IN
Connect an audio cable (not supplied) to the AUX IN socket on the side of the DAB
Radio. Connect the other end to a suitable output socket on your auxiliary device.
5
02 Get going